Menu
Close

Design and Set-Up Questions | Artwork

What type of files can I send to ConceptJet?
We recommend saving as a PDF file. You may also send the file in the following types: JPG, JPEG, TIF, TIFF, EPS, and PNG.

We prefer that you send PDF with embedded or outlined fonts. PDF files are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.
What color mode should my files be in?

If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job.

These colors are in RGB:
These are the same colors but in CMYK:

You should always start and finish your designs in CMYK color mode.

What resolution should my file be?

Low-resolution files may be printed as is or will be placed on hold until we receive new files, slowing your turn-around.

These are 72 DPI low res images:
These are the same images but at 300 DPI:

We only accept 300 dpi files and no less.

How should I set up my bleed?

Bleed must extend past the cut-line and will be trimmed from the product during the final cutting phase. When the image is required to extend all the way to the edge, bleed is needed to preserve the finished look and the quality of the final product.

Please keep all text at least 0.125" inside the cut-line.

  • The bleed for Standard Products is 0.125".
  • The bleed for Booklets and Presentation Folders is 0.25".
  • The bleed for Sign/Banner products is 1"

Proudly Accepting

About Us

Phoenix3 Marketing crafts strategic and tactical marketing brands that move people, support a positive customer experience and facilitate growth.

Contact Us

76 4th Street North #1314
St. Petersburg, FL 33701
727.592.1916
service@phoenix3marketing.com

© 2023 All Rights Reserved. Phoenix3 Marketing, LLC

chevron-downhomeenvelopephone-handsetcrossmenumenu-circlecross-circle